6 Ways to Fix Verifying DMI Pool Data error on Windows 11/10

The “Verifying DMI Pool Data” error is like an elusive sleeper cell within your computer, lying dormant until it decides to show its presence, unexpectedly and at the most inconvenient times. No matter how hard you try, you might find yourself stuck at the Windows startup with an unyielding black or blue screen, accompanied by the frustrating message “Verifying DMI Pool Data.” The process seems never-ending, leaving you in a state of uncertainty and exasperation.

   Important Notice:

Before attempting any critical fixes on your Windows OS, it’s crucial to recover and store your data in a safe place. EaseUS Data Recovery Wizard comes to the rescue for recovering data from a crashed PC.

No matter if you’re facing the dreaded blue screen of death, startup failures, or boot problems, this tool enables you to boot up your PC and recover your precious data effortlessly. So, be sure to use EaseUS Data Recovery Wizard to safeguard your files before proceeding with any fixes!

Note: Free Version allows you to recover upto 2GB Data.

In the past, the “Verifying DMI Pool Data” error used to be quite common in Windows XP and Windows 7. However, with the introduction of more advanced versions such as Windows 11, 10, 8, and Windows Server 2019, this error gradually started to fade away. Unfortunately, recent statistics reveal that the “Verifying DMI Pool Data” error has resurfaced and is now affecting various Windows 11/10 computers.

What is DMI Pool Data?

DMI is short for Desktop Management Interface, and DMI Pool Data refers to the section of memory that stores critical hardware information about a computer’s configuration.

When you boot your computer, the BIOS communicates with various hardware components such as the Motherboard, RAM, HDD/SSD, CPU, etc., and stores the important information in the DMI Pool Data. Later, the Windows OS uses this data to recognize and configure the various hardware components present in your computer.

So, the question is, what exactly is the “Verifying DMI Pool Data” error?

When your Windows OS begins the booting process, the BIOS initiates a scan of the DMI Pool section to verify critical hardware information. If, for any reason, the BIOS encounters difficulty accessing the DMI Pool Data, it repeatedly attempts to do so, leading to the persistent message “Verifying DMI Pool Data.

Several factors can contribute to this issue, such as disk errors, malfunctions in the HDD/SSD, or when fundamental hardware components like the CPU, Motherboard, RAM, etc., have been altered or changed. These changes can disrupt the proper functioning of the DMI Pool, causing the verification process to stall, resulting in the error message during startup.

How to Resolve “Verifying DMI Pool Data” Error on Windows 11/10/8/7 and Windows Server?

If your computer gets stuck during boot and displays the DMI Pool Data error, there’s no need to panic. Fortunately, you can resolve this issue by following a few troubleshooting steps. Here are some fixes that will help you get past this problem and successfully boot your PC.

Solution 1: Restart your computer.

Restarting electronic devices is often considered an evergreen troubleshooting technique. Interestingly, it’s a mysterious solution that seems to work like magic on various issues. Though not always apparent, a simple restart can work wonders in resolving problems. So, try your luck and perform several restarts to see if it does the trick!

Solution 2: Play with BIOS

The “Verifying DMI Pool Data” error crops up when the BIOS fails to verify essential hardware information during the boot process. The culprit could be a misconfigured or outdated BIOS. To address this, try resetting the BIOS to its default settings and, if possible, update the BIOS version to the latest available. These simple steps might just be the key to resolving the issue and getting your system up and running smoothly again.

Reset BIOS/UEFI to Default
Step 1: Open BIOS/UEFI Settings.
Step 2: Go to the Exit tab → Select Load Setup Defaults. Press F10 to Save & Exit.

Update BIOS

Updating the BIOS is a critical process that carries the risk of permanent PC crashes. Therefore, it should be approached with extreme caution, and every detail must be checked thoroughly. Before proceeding, ensure that you have the correct manufacturer details and version number of the BIOS you intend to install. Double-checking this information is crucial to avoid potential issues.

Identify the BIOS manufacturer and version [Most Important].

“When beginning the BIOS update process, identifying the installed BIOS information is of utmost importance to ensure a smooth installation. Clear identification of the current BIOS version is crucial before proceeding with any updates, as installing the wrong version could lead to severe problems for your computer.

Updating BIOS
Step 1: Click on the Start menu and search for MSInfo then open the application.
Step 2: Within MSInfo, you’ll find details about your BIOS manufacturer and version number.”
Step 3: Search for the Latest version of BIOS on the official manufacturer website and download.
Step 4: Double click on the downloaded file to install.

Solution 3: Clear CMOS

CMOS is a small, battery-powered chip on a computer motherboard that stores the BIOS configuration information. Sometimes, it requires clearing CMOS data to resolve hardware issues, boot issues, startup problems, etc. You can easily clear CMOS data as follows.

Reset CMOS Data
Step 1: Shut down your computer and remove the power plug.
Step 2: Find the Coin sized battery on the motherboard. Remove it and wait for a minute and then Re-insert it. It will clear all the CMOS data and reset BIOS settings to default.
Step 3: Connect the power plug and turn on your computer.

Solution 4: Remove external peripherals and components.

In certain cases, the BIOS might struggle to verify critical hardware information during startup due to invalid data sent to the DMI Pool by external devices or components. Consequently, this can lead to Windows being stuck at startup. To resolve this issue, a simple yet effective fix is to disconnect all external peripherals, devices, and components, and then perform a reboot. This step allows the BIOS to re-establish the hardware verification process accurately and often clears up the problem, enabling a successful startup.

Solution 5: Reset Windows

Resetting Windows involves reverting all the changes made to your computer and returning it to its original state when it was first installed. This process proves helpful when Windows encounters critical issues that can’t be easily resolved through regular troubleshooting methods.

However, it’s essential to be aware that resetting Windows carries a risk of data loss. Therefore, before proceeding with the reset, it’s advisable to retrieve all your important files from the crashed computer using a reliable data recovery tool like EaseUS Data Recovery. This precaution ensures that your valuable data is safeguarded before initiating the reset process.

Solution 6: Repair Windows OS Using EaseUS Partition Master

If none of the previously mentioned methods resolve the “Verifying DMI Pool Data” error and you’re still unable to boot your computer, it might be necessary to repair your Windows installation.

Step 1: Create Windows OS Bootable USB Drive: Create a bootable USB drive by using a free tool EaseUS Partition Manager. This will enable you to install or repair the Windows OS.
Download EaseUS Partition Manager

Resize/Extend Partition
Clone/Migrate HDD/SSD
Convert between GPT/MBR/NTFS/FAT32
All-in-One Disk Management System

Safe & Secure    65 Million Users
99.7% Success Rate
Excellent Trustpilot Rating
TrustScore:4.7    Review:14.5K

Create WinPE Bootable Drive using EaseUS Partition Master
Step 1: Insert 8GB+ USB flash drive to computer.
Step 2: Launch EaseUS Partition Master and go to Toolkit → Win 7/8/10/11 ISO.
EaseUS Partition Master - Create Bootable USB Drive
Step 3: Browser your ISO file and click Next.
EaseUS Partition Master - Create Bootable USB Drive
Step 4: Select your USB drive and click on Start button to create Bootable Windows 11/10/8/7 and Windows server USB drive.
EaseUS Partition Master - Create Bootable USB Drive
Step 2: Boot from USB Drive and Repair your computer: Insert the bootable USB drive into your computer, restart the system, and boot from the USB drive. Follow the on-screen instructions to repair your Windows installation.
System Restore - Steps by Steps
Step 1: Open the Advanced Startup Option or Windows Recovery Environment. Go to the Troubleshoot ➜ Advanced options ➜ System Restore.


Step 2: Click Next and then Select Date.

select system restore from the list

Step 3: Click on Finish to start Restoring process.

By following these three steps, you can effectively repair your Windows installation and hopefully resolve the “Verifying DMI Pool Data” error, allowing you to get your computer up and running smoothly again.


Encountering the “Verifying DMI Pool Data” message during Windows startup can be a scary experience. However, fear not, as this issue can be resolved by following the correct methods outlined in this article. Rest assured, with the troubleshooting steps provided here, you can tackle the problem and get your computer back to its smooth functioning state.