Fix Video Scheduler Internal Error Windows 11/10 – Step-by-Step

Video Scheduler Internal Error

Experiencing a Video Scheduler Internal Error can be quite sudden and unexpected, especially when your computer was running smoothly just before. Suddenly, you’re faced with a Blue Screen of Death (BSOD) bearing the error code 0x00000119.

This particular BSOD error, known as the Video Scheduler Internal Error, typically appears on a blue screen before your system completes its boot process. It often indicates problems with your graphics card, which might be failing or malfunctioning. However, it’s essential to note that there are other factors that can trigger the 0x00000119 error.

How to fix Video Scheduler Internal Error on Windows 11/10

In this article, I’ll provide you with tried-and-tested solutions that are guaranteed to assist you in recovering from this error.

   Important Notice:

Before attempting any critical fixes on your Windows OS, it’s crucial to recover and store your data in a safe place. EaseUS Data Recovery Wizard comes to the rescue for recovering data from a crashed PC.

No matter if you’re facing the dreaded blue screen of death, startup failures, or boot problems, this tool enables you to boot up your PC and recover your precious data effortlessly. So, be sure to use EaseUS Data Recovery Wizard to safeguard your files before proceeding with any fixes!

Note: Free Version allows you to recover upto 2GB Data.

Solution 1: Clean and Re-insert the Graphics card.

As we have mentioned above this error usually occurs due to graphics card issues, so it is best practice to service the graphic card as follows:

  1. Remove the graphics card from the motherboard.
  2. Clean it with a dry brush and remove all the dust.
  3. Clean its connector part with thinner or petrol.
  4. Re-insert it to the motherboard.
  5. Turn on your computer to see effect.

Solution 2: Repair Windows using the Command Prompt

There are some sets of commands that play a crucial role in terms of fixing the Windows operating system. These commands are SFC, CHKDSK, DISM, and Bootrec commands. Run these commands to repair various parts of Windows OS such as corrupted system files, disk errors, file system problems, startup issues, etc.

SFC/Chkdsk/Dism - Step by Step
Step 1: Open Command Prompt as Administrator.

open command prompt as administrator in Windows 8, 10 & 11

Step 2: Now run the following commands one by one.
i. System File Checker tool

sfc /scannow

ii. Run Dism command

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth

iii. Run Disk checking utility.

chkdsk /f c:

It will show you message:

Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)

Press Y and Press Enter. The disk checking will start on next pc start.

Solution 3: Try Safe Mode

Another approach worth considering is attempting to log in using Safe Mode. If your PC successfully boots into Safe Mode, it indicates that potentially corrupted or outdated drivers are hindering Windows from loading correctly. While in Safe Mode, you can execute various troubleshooting steps to address this issue.

Open PC in Safe Boot Mode
Step 2: Go to Troubleshoot

Troubleshoot in Advanced Startup Menu Windows 10 & 11

Step 3: Select Advanced options

advanced option windows 10 & 11

Step 4: Select Startup Settings


Step 5: Click on Restart button to enable safe mode.

Step 6: Once you boot your computer in Safe mode, uninstall the recently added games, drivers, and softwares.
Update Windows, Drivers, and Apps - Step by Step
[Update Windows]
Step 1: Go to Settings ➜ Windows Update. Click on the Check for updates button and if shows any pending updates, download, and install them.
windows update settings in windows 11 & 10
[Update Drivers]
Step 2: Go to the Device Manager. Find the outdated drivers, right-click on them, and select Update.
[Update Apps]
Step 3: Open Microsoft Store. Go to the Library and click on the Get updates button.
update ms store apps
Update Driver - Step by Step
Step 1: Open Device Manager. Press Windows Key + X and click on Device manager.
Open Device Manager
Step 2: Look for driver which has yellow exclamation mark or warning on it.
Open Device properties
Step 3: Double click on the driver to open Properties. Go to Driver tab and click to Update Driver button.
Update driver
Step 4: Select “Search automatically for drivers”.
search automatically for drivers
Step 5: Follow the instructions and completes the process.
Step 6: If you get the “Windows was unable to install your driver” message, use another effective third-party tool to update/install all your driver.
Windows was unable to install your device
Clean Boot Mode - Step by Step
Step 1: Go to Start Menu and search for msconfig. Select System Configuration from the search results.
Windows 10 Clean Boot
Step 2: Click on Service Tab and check the Hide all Microsoft services check box. Next click Disable All button.
Windows 10 Clean Boot
Step 3: Go to Startup Tab and click Open Task Manager link.
Windows 10 Clean Boot
Step 4: Go to Startup Tab in the Task Manager and Disable all the Startup Item.
Windows 10 Clean Boot
Step 5: Close the Task Manager and Click OK in System Configuration Dialog Box and then Restart your PC.

Solution 4: System Restore

Utilizing System Restore is an excellent option for resolving startup issues, BSOD errors, and boot errors. This process reverts your PC to its last known good configuration state without affecting your files. Follow the steps outlined below to perform a System Restore.

System Restore - Steps by Steps
Step 1: Open the Advanced Startup Option or Windows Recovery Environment. Go to the Troubleshoot ➜ Advanced options ➜ System Restore.


Step 2: Click Next and then Select Date.

select system restore from the list

Step 3: Click on Finish to start Restoring process.

Solution 5: Perform Startup Repair

System Restore only works if you have created a system restore point earlier. If you are unlucky with System Restore, you can perform Startup Repair as follows:

Startup Repair - Step by Step
Step 1: Boot your PC using the Windows Installation media. It will open Windows Installation Wizard. Click Next.

windows os installation

Step 2: Select Repair your computer.

repair your computer option windows 10 & 11

Step 3: It will open the Advanced Startup Option or Windows Recovery Environment. Click on the Troubleshoot.

Troubleshoot in Advanced Startup Menu Windows 10 & 11

Step 4: It will open the Advanced startup menu. Go to the Troubleshoot ➜ Advanced options ➜ Startup Repair.
Startup Repair Windows 10 & 11
Step 5: Select OS.
Startup Repair - Select OS
Step 6: Wait until it diagnoses and repairs your PC.

How to prevent Video Scheduler Internal Error in Future

It’s also essential to frequently maintain your PC to prevent future occurrences of the Video Scheduler Internal Error. Manually managing every aspect of the Windows OS can be time-consuming and complex. To streamline this process, it is highly recommended to employ a dependable PC Optimization Tool. Such tools can efficiently optimize, secure, and keep your PC up to date, ensuring its long-term health and performance.

Windows is made with huge number of dll files, exe files, sys files, various types of services, databases, etc so, it is not possible to keep monitoring all the files always. A brilliant PC Optimizer tool repairs damages, fix errors, update windows and drivers, and eliminate various types of errors silently.

Outbyte PC Repair Tool does all the above task easily and provides you an errorfree and smooth Windows environment to work so that you can focus on your business only.

3 Steps to Fix this Error
Step 1. Download Outbyte PC Repair Tool [File Size: 16.4 MB]
Step 2. SCAN your Windows PC
Step 3. Click Fix button to Repair Error


The Video Scheduler Internal Error (0x00000119) is a specific type of BSOD error that can disrupt the Windows boot process. To restore normal PC operation, it’s essential to eliminate this error by applying effective troubleshooting steps. These steps may include running commands like sfc, dism, and chkdsk, executing a system restore, attempting startup repair, and booting into Safe Mode.